Milkdrop presets in magic
-
- Posts: 18
- Joined: Mon Jun 15, 2015 7:17 am
- Location: Vienna
- Contact:
Milkdrop presets in magic
I am not a pro
But is it possible to use the milkdrop presets in magic? Maybe with the GLSL shader or to convert them into
But is it possible to use the milkdrop presets in magic? Maybe with the GLSL shader or to convert them into
Re: Milkdrop presets in magic
there is a build of milkdrop with spout support on the spout forums.
you could spout milkdrop into magic.
you could spout milkdrop into magic.
Re: Milkdrop presets in magic
Yup, that works. See this thread: http://spout.zeal.co/forums/topic/winam ... ut-output/
-
- Posts: 18
- Joined: Mon Jun 15, 2015 7:17 am
- Location: Vienna
- Contact:
Re: Milkdrop presets in magic
Thank you i will try it...
-
- Posts: 18
- Joined: Mon Jun 15, 2015 7:17 am
- Location: Vienna
- Contact:
Re: Milkdrop presets in magic
ok i tried different versions of spout, milkdrop in DX 9 and 11, i get it only in DX9 into magic.
But magic always crashes in that second i select "sender"...
But magic always crashes in that second i select "sender"...
Re: Milkdrop presets in magic
Ok, I'm not sure, but I will have to test that. Hard to know whether it's an issue with Magic or with Milkdrop or with Spout itself. It's tricky, especially depending upon the graphics hardware and configuration. But, Magic definitely shouldn't be crashing if it's possible to avoid it.
Out of curiosity, have you tried also asking about it in the Spout forums? I'll go look there now to see if anyone else is having a similar problem.
Out of curiosity, have you tried also asking about it in the Spout forums? I'll go look there now to see if anyone else is having a similar problem.
-
- Posts: 109
- Joined: Tue Jun 23, 2015 7:42 pm
Re: Milkdrop presets in magic
Yo I have not had this particular issue but, when I was creating my own presets for Milkdrop, I noticed you couldn't save presets or edit names with the program in the actual: Program Files or Program Files(x86), so I moved the whole folder to my desktop and all those saving issues went away, because it bypasses having to have Administrator privileges.bluffphonica wrote:ok i tried different versions of spout, milkdrop in DX 9 and 11, i get it only in DX9 into magic.
But magic always crashes in that second i select "sender"...
I still have my Winamp on my Desktop and I use Spout, and works great with Milkdrop and Magic.
Again I never had this problem, but I hope it helps you out anyway.
-
- Posts: 18
- Joined: Mon Jun 15, 2015 7:17 am
- Location: Vienna
- Contact:
Re: Milkdrop presets in magic
Hi SplatterBrainz!
Thank you for your motivation to help. The copy elsewhere doesn´t help. In my case it is no problem with the rights in windows - i think.
These are my first tries with spout and receiver in magic. Perhaps i make another mistake. If you have enough time, is it possible to write me a step by step instruction? Magic alway crashs, but i have it already that winamp crashs too.
Does it matter which program i start first (winamp/Magic)?
By the way, now i have Win10 and directX 12.
Thank you for your motivation to help. The copy elsewhere doesn´t help. In my case it is no problem with the rights in windows - i think.
These are my first tries with spout and receiver in magic. Perhaps i make another mistake. If you have enough time, is it possible to write me a step by step instruction? Magic alway crashs, but i have it already that winamp crashs too.
Does it matter which program i start first (winamp/Magic)?
By the way, now i have Win10 and directX 12.
-
- Posts: 109
- Joined: Tue Jun 23, 2015 7:42 pm
Re: Milkdrop presets in magic
I would just reinstall a fresh copy of the newest winamp.bluffphonica wrote:Hi SplatterBrainz!
Thank you for your motivation to help. The copy elsewhere doesn´t help. In my case it is no problem with the rights in windows - i think.
These are my first tries with spout and receiver in magic. Perhaps i make another mistake. If you have enough time, is it possible to write me a step by step instruction? Magic alway crashs, but i have it already that winamp crashs too.
Does it matter which program i start first (winamp/Magic)?
By the way, now i have Win10 and directX 12.
Then go here:https://github.com/leadedge/Spout2/tree/master/MILKDROP
Download the DDL.
Copy vis_milk2.dll into the Winamp-Plugin Folder
Then open Winamp go to Options -> Visualizations -> Configure Plugin
MORE SETTINGS tab
[ ] Enable Spout output (default ON)
[ ] Enable Spout DirectX 11 mode (Default OFF - DirectX 9)
Just tick Enable Spout output for now. \
Play a song, get Milkdrop going within Winamp.
Open Magic, for troubleshooting purposes I would just start with a blank New Magic project.
Right Click, Add, Special, Spout Receiver.
That should do it. If it crashes then I have no clue because thats exactly what I did.
Re: Milkdrop presets in magic
bluffphonica - are you using Intel HD graphics by any chance?
Recently we have confirmed that Spout DirectX 11 functions do not work with Intel HD4400, but DirectX 9 does.
For testing with Spout , always start with the Demo sender and receiver. If they work, move on from there.
Recently we have confirmed that Spout DirectX 11 functions do not work with Intel HD4400, but DirectX 9 does.
For testing with Spout , always start with the Demo sender and receiver. If they work, move on from there.
Re: Milkdrop presets in magic
hello,
Does anyone know how to get the presets to play in a specific order once they're in a scene? does milkdrop have some sort of playlist feature?
Does anyone know how to get the presets to play in a specific order once they're in a scene? does milkdrop have some sort of playlist feature?
Re: Milkdrop presets in magic
I hope someone can help with this. When I first saw this thread, I set everything up and it all worked fine, no issues with spout, magic, or winamp but something's changed.
Now, when I start milkdrop with "linein://" , something is triggering it although there is no apparent sound source. I uninstalled and reinstalled programs, drivers, looked everywhere but I can't find a solution.
when I play sounds from you-tube, I can see the small spectrum in winamp's main window working, going on and off when I start and stop you-tube video, but the visualizer doesn't react to the sound, although it is reacting to something, from somewhere.
if I'm playing a file through winamp, it works as it should, but not with linein. help, not much hair left.
Now, when I start milkdrop with "linein://" , something is triggering it although there is no apparent sound source. I uninstalled and reinstalled programs, drivers, looked everywhere but I can't find a solution.
when I play sounds from you-tube, I can see the small spectrum in winamp's main window working, going on and off when I start and stop you-tube video, but the visualizer doesn't react to the sound, although it is reacting to something, from somewhere.
if I'm playing a file through winamp, it works as it should, but not with linein. help, not much hair left.