Left And Right Channels/ Waveforms
-
- Posts: 4
- Joined: Wed Jul 01, 2015 7:20 pm
Left And Right Channels/ Waveforms
I'm trying to create 2 waveforms, one on the left and one on the right (i know how to do that). I need the waveform on the left to show left channel audio and the right waveform to show right channel audio. How could i do it?
Re: Left And Right Channels/ Waveforms
For an example of how to do that, you can select Help > Open Sample Project, open "ManyScenes.magic", and go to the Stereo Waves tab. It shows how to do a stereo waveform as you describe, although they are on top of each other instead of side-by-side. But since you know how to do one on the left and one on the right, you should be able to easily change it .
The main concept to understand is that one of the Waveform modules uses Input 0 as the source, and the other uses Input 1. On most sound cards, these correspond to the left and right stereo channels.
Does that help?
The main concept to understand is that one of the Waveform modules uses Input 0 as the source, and the other uses Input 1. On most sound cards, these correspond to the left and right stereo channels.
Does that help?
-
- Posts: 4
- Joined: Wed Jul 01, 2015 7:20 pm
Re: Left And Right Channels/ Waveforms
Thank-you this helped a lot.