I've got an object going off screen from left to right and then back from right to left using:
Translate - X Globals - Tri Osc and Scale settings.
How do I make this object get to the middle of the screen stop for a few seconds then continue off the screen?
Any help greatly appreciated...
Translate object X-axis from left to right-but stop 1/2 way
-
- Posts: 41
- Joined: Fri Mar 12, 2021 10:33 pm
Re: Translate object X-axis from left to right-but stop 1/2
This might do what you want...
This splits up the motion into three parts then cycles between them. The motion and the pause must be the same length though. This configuration will pause once for each full sweep of the screen. You'll have to add another static position to have it wait every time.-
- Posts: 41
- Joined: Fri Mar 12, 2021 10:33 pm
Re: Translate object X-axis from left to right-but stop 1/2
Sadler wrote:This might do what you want...This splits up the motion into three parts then cycles between them. The motion and the pause must be the same length though. This configuration will pause once for each full sweep of the screen. You'll have to add another static position to have it wait every time.
Great I will try this - thank you
-
- Posts: 41
- Joined: Fri Mar 12, 2021 10:33 pm
Re: Translate object X-axis from left to right-but stop 1/2
Well I am half way there: as your instructions...
My shape appears centre screen pauses and then go to the left or right
I want the shape to come from the left, pause in the centre and then go off right and then come from the right pause in the centre and then go off left.
Any help greatly appreciated...
My shape appears centre screen pauses and then go to the left or right
I want the shape to come from the left, pause in the centre and then go off right and then come from the right pause in the centre and then go off left.
Any help greatly appreciated...
Re: Translate object X-axis from left to right-but stop 1/2
Change the order of the inputs into the InputSelector?
In my example it does the steps "Go left then return to centre", "Pause at centre", "Go right then return to centre" in that order.
You can choose different steps and display them in any order - the trick is to make them look continuous.
In my example it does the steps "Go left then return to centre", "Pause at centre", "Go right then return to centre" in that order.
You can choose different steps and display them in any order - the trick is to make them look continuous.
-
- Posts: 41
- Joined: Fri Mar 12, 2021 10:33 pm
Re: Translate object X-axis from left to right-but stop 1/2
Ok Sadler, I will work on it - thank you for your time...