Previous topicNext topic

Help making a model or object move/rotate from one end only

Questions, comments, feedback, etc.
Post Reply
yumatripp
Posts: 21
Joined: Fri Aug 14, 2020 9:45 pm

Help making a model or object move/rotate from one end only

Post by yumatripp »

I need help with the order in which to make this happen:

I have a model of an elongated cylinder. A pole if you will. I want that pole to move like a light beam from a dj light moving head fixture. So lets say the "top" is the part I want to stay static, and the rest of the pole/ligh moves based on the anchor from that end point. What is the process for making that happen?

I can make it move about CLOSE to that, but the "anchor" side of the model still shifts quite a bit when the other end is rotating via x and y.

Any help would be appreciated.
Sadler
Posts: 1139
Joined: Sat Aug 02, 2014 7:10 pm
Location: London, UK

Re: Help making a model or object move/rotate from one end o

Post by Sadler »

This questioned has been asked and answered fairly recently.
https://magicmusicvisuals.com/forums/vi ... f=2&t=2455
Post Reply