Magic

Music Visuals
https://magicmusicvisuals.com/forums/

Audio Interface Roland UA-25EX

https://magicmusicvisuals.com/forums/viewtopic.php?f=2&t=2403

Page 1 of 1

Audio Interface Roland UA-25EX

Posted: Tue Dec 15, 2020 6:14 pm
by lightninrick
Hi All

My first post here, so please forgive any missteps.

I searched here and elsewhere for help with this, but with no luck.

I am trying to use a Roland UA-25EX USB Audio Capture interface to feed live audio into Magic. It shows up as a choice in the Input Sources window, but only as a MIDI device, not an audio source.

Has anyone found a way to use this device? It is kind of old, is there a newer device that others have had success with?

Thanks

Rick

Re: Audio Interface Roland UA-25EX

Posted: Wed Dec 16, 2020 9:43 am
by Sadler
Check you can see it in "Sound Control Panel". Does it work in other apps?

The manual for your device says, "If you change the setting of this switch, you must close all software, disconnect the USB cable
that connects the UA-25EX to your computer, and then reconnect the USB cable"

I have an old audio interface, its ASIO driver is always visible to Magic but other channels (digital, midi etc) are only visible when physically connected.

Re: Audio Interface Roland UA-25EX

Posted: Thu Dec 17, 2020 5:48 pm
by lightninrick
Thanks for your reply.

Yes, the interface works with other applications. And in fact, audio from Magic plays through it. The problem is that the interface shows as a Midi input, not as an audio source. It is set as the default input and output in control panel.

Re: Audio Interface Roland UA-25EX

Posted: Thu Dec 17, 2020 6:00 pm
by Eric

Re: Audio Interface Roland UA-25EX

Posted: Thu Dec 17, 2020 11:54 pm
by lightninrick
Thanks for the help guys! I have gotten it working. When I looked at the UA-25 in Control Panel, I saw it was set as the default in and out for sound. So the solution was to use IN 0 and IN 1 as the inputs, not the UA-25.

Thanks again!

All times are UTC
Page 1 of 1