Previous topicNext topic

Magic Window completely black/not moving

Questions, comments, feedback, etc.
Post Reply
nooe7
Posts: 3
Joined: Mon Jun 04, 2018 11:09 am

Magic Window completely black/not moving

Post by nooe7 »

Hey Everyone,

I've been using Magic now for about a year and everything has been working amazing. Love this product, been using midi controllers and live instruments for my band and everything works great when I'm running this on my desktop. So I purchased a new laptop specifically to run this and my midi controllers. Its a i7-8550U with dedicated N'vidia 2GB graphics card with 4k. have 16GB ram and should have no problem running this software. However when I run Magic the preview window does absolutely nothing, I've tried just running a single shader, waveform, spectrum, media file anything and nothing works. I've tried disabling double buffering and vertical sync and messing with the frame rate but it just shows up as an incomplete figure either a non moving shader or waveform or just a stagnant picture. Any help would be greatly appreciated, really want to get it setup for mobility.
Magic
Site Admin
Posts: 3440
Joined: Wed Apr 09, 2014 9:28 pm

Re: Magic Window completely black/not moving

Post by Magic »

Hmm, I'm not sure. I haven't heard of that issue before. Sounds like it might be something with your graphics driver. Can you go to Help > OpenGL Info, and copy/paste the first 4 lines into a reply here?

Also, does the Magic window have the status information in the lower-left corner (https://magicmusicvisuals.com/downloads ... nformation), or is it really completely black everywhere?
nooe7
Posts: 3
Joined: Mon Jun 04, 2018 11:09 am

Re: Magic Window completely black/not moving

Post by nooe7 »

Hey Eric,

The screen shows the status information but no FPS just the resolution of the screen.

Heres the Open GL info:


Version: 4.5.0 NVIDIA 381.78

Vendor: NVIDIA Corporation

Maximum RGBA Texture Size: 16384x16384 pixels

Maximum Renderbuffer Size: 16384x16384 pixels
nooe7
Posts: 3
Joined: Mon Jun 04, 2018 11:09 am

Re: Magic Window completely black/not moving

Post by nooe7 »

Ok went through redownloaded all my drivers and it seems to be working now. thanks
Magic
Site Admin
Posts: 3440
Joined: Wed Apr 09, 2014 9:28 pm

Re: Magic Window completely black/not moving

Post by Magic »

Good, I'm glad you got it working. Downloading the latest drivers is always the best first step.
qutdin94
Posts: 2
Joined: Fri Jun 08, 2018 5:40 pm

Re: Magic Window completely black/not moving

Post by qutdin94 »

blank preview window. how to fix ?http://prntscr.com/jsmzs3
Magic
Site Admin
Posts: 3440
Joined: Wed Apr 09, 2014 9:28 pm

Re: Magic Window completely black/not moving

Post by Magic »

That's not really a blank window. If the resolution and fps are there in the lower-left corner, it means the app is working properly. The problem is most likely that you haven't hooked up your modules and/or sources in a way that would create anything. If you provide a screenshot of your whole project (without the OpenGL window in the way) I can try to guide you in the right direction.
qutdin94
Posts: 2
Joined: Fri Jun 08, 2018 5:40 pm

Re: Magic Window completely black/not moving

Post by qutdin94 »

http://prntscr.com/jsso8q this is simple test project. it doesn't show the preview. just a blank window.

here is my old project back on april. it shows just fine. https://prntscr.com/izjuxt
i don't know what cause this error.
Terry Payman
Posts: 710
Joined: Sun Sep 14, 2014 8:15 am
Location: UK
Contact:

Re: Magic Window completely black/not moving

Post by Terry Payman »

The Kaleidoscope must always have an input source, else you will see nothing on its output.

If you add a Starfield to the kaleidoscope input, with default parameters, you will always get an output.
Attachments
eg.jpg
eg.jpg (57.65 KiB) Viewed 4363 times
Post Reply