Magic Music Visuals

Ok, as the subject says, how does one translate the values of the Ramp, Sine and Triangle Oscillators in seconds? 1.0 = ?

Thx in advance!!

For sound output, Magic uses whatever device you selected for your Windows settings. If you are hearing Windows system sounds in your Bluetooth speaker, then you should hear sound from Magic in your Bluetooth speaker. When I try to use a 3rd party application as a sound source via the stereo mixer ...

For sound output, Magic uses whatever device you selected for your Windows settings. If you are hearing Windows system sounds in your Bluetooth speaker, then you should hear sound from Magic in your Bluetooth speaker. When I try to use a 3rd party application as a sound source via the stereo mixer ...

Sorry, I'm not sure what your question is? The dropdown menu is for input, not output... Sorry! Badly phrased! When I try to use my Bluetooth speaker with magic, there is no input nor output sound! It works fine with Pure Data in a similar audiovisual setup.. To be clear, when I use an audio file a...

Eric wrote:Sorry, I'm not sure what your question is? The dropdown menu is for input, not output...

Sorry! Badly phrased!

When I try to use my Bluetooth speaker with magic, there is no input nor output sound!

It works fine with Pure Data in a similar audiovisual setup..

Hi! I am using the Bose Soundlink Bluetooth Speaker, the headphone mic appears in the list of soundcards but not the speaker, usually I choose the stereo mixer as I use audio from 3rd party programs to drive my visuals. Now as I am using the Bluetooth speaker that's not an option, and both ASIO opti...

THANKS so much the both of you!

That's what I was looking for, a mix module!

Ok, I have noticed that unlike Effects2D, some of the new ISF effects have no true "dry" setting.. Meaning a setting where the parameters are at absolute zero and the incoming signal is completely unaffected. For example, City Lights(seemingly impossible to get anything close to a dry sign...

Was most definitely the graphics card...

After upgrading to an Alienware I commonly run between 110-120 fps now..

Ok, so.. I had posted some months back about a perceived performance issue..... Now, I am totally clear on what the REAL problem is. My graphics card is bottom of the line. My ASUS F550L uses a GeForce GT 720M....I started to realise it was sub par when working on a project in Pure Data/GEM. I have ...

Great! I was looking there but couldn't quite find it...thanks so much!

Btw.....suggestion, it would be great to be able to record parameter automation....

I think this has been suggested already though....

Okk now that makes sense.....I am coming from the audio world so a bit unschooled in these matters.....how would I go about updating the driver(s) ?

and via control I can access NVIDIA but there seems not to be a way to disable from there...

Thanks so much for your swift responses and help

So in that case the performance is not worse......

Ok thanks, that's not it then :). So when you say the performance is worse in 1.65, does the status information actually show that the frames per second is lower? OKKK We (You) have found it...... The frame rate is considerably higher in 1.65 basically...hovering around 47, whereas in 1.53 hovers a...

Hmm, the only thing I can think of is that maybe your project is defaulting to a higher resolution in 1.65, which would cause it to go slower. If you enable Window > Magic Window Options > Status Information , what does it say about the resolution in 1.65 vs. 1.53? THX for your speedy response! The...

Hi! I purchased Magic at 1.53 and had never upgraded til this week.. It ran very smoothly with few to no hitches.. However, after upgrading to 1.65 I noticed my laptop would get really hot and the screen would flicker, for example when using the radial blur module... This never happened with 1.53.. ...